STUB SERIES PARALLEL SHANK TWIST DRILLS (DIN 1897) |
 Standard DIN 1897 N | Right-hand Ground: d = 0,5...20,0 mm Milled: d = 2,0...10,0 mm HSS For drilling carbon, alloyed, constructional steels and cast iron. (more) |
 Standard DIN 1897 Ti | Right-hand Ground: d = 0,5...13,0 mm Split-point: d = 2,0...13,0 mm HSSCo For drilling hard materials, titanium and Ti-alloys, and stainless steels. (more) |
JOBBER SERIES PARALLEL SHANK TWIST DRILLS (DIN 338) |
 Standard DIN 338 N | Right-hand Ground: d = 0,3...20,0 mm Milled: d = 2,0...10,0 mm HSS For drilling carbon, alloyed, constructional steels and cast iron. (more) |
| Right-hand Ground: d = 0,5...20,0 mm HSS For machining hard and brittle materials, gun metal, brass, bronze. (more) | |
 Standard DIN 338 W | Right-hand Ground: d = 0,5...20,0 mm HSS For drilling aluminium, aluminium alloys, copper, brass, bronze and soft plastics. (more) |
 Standard DIN 338 Ti | Right-hand Ground: d = 0,5...13,0 mm Split-point: d = 2,0...13,0 mm HSSCo For drilling hard materials, titanium and Ti-alloys, and stainless steels. (more) |
 Standard DIN 338 GT-100 | Right-hand Ground: d = 3,0...13,0 mm Split-point HSS/HSSCo For drilling unalloyed and alloyed steels (tensile strength up to approx. 1000 N/mm2) and cast iron.(more) |
 Standard DIN 338 LN | Left-hand Milled: d = 2,0...10,0 mm HSS For drilling carbon, alloyed, constructional steels and cast iron. (more) |
LONG PARALLEL SHANK TWIST DRILLS (DIN 339) |
 Standard DIN 339 N | Right-hand Ground: d = 0,65...20,0 mm HSS For drilling carbon, alloyed, constructional steels and cast iron. (more) |
LONG PARALLEL SHANK TWIST DRILLS (DIN 340) |
 Standard DIN 340 N | Right-hand Ground: d = 0,5...20,0 mm Milled: d = 2,0...10,0 mm HSS For drilling carbon, alloyed, constructional steels and cast iron. (more) |
 Standard DIN 340 H | Right-hand Ground: d = 0,5...20,0 mm HSS For machining hard and brittle materials, gun metal, brass, bronze. (more) |
 Standard DIN 340 W | Right-hand Ground: d = 0,5...20,0 mm HSS For drilling aluminium, aluminium alloys, copper, brass, bronze and soft plastics. (more) |
 Standard DIN 340 Ti | Right-hand Ground: d = 0,5...13,0 mm Split-point: d = 2,0...13,0 mm HSSCo For drilling hard materials, titanium and Ti-alloys, and stainless steels. (more) |
EXTRALONG PARALLEL SHANK TWIST DRILLS (DIN 1869) |
 Standard DIN 1869 | Right-hand Ground: d = 2,0...13,0 mm HSS For deep and hard-to-reach hole drilling in carbon, alloyed, constructional steels and cast iron. (more) |
EXTRALONG PARALLEL SHANK TWIST DRILLS |
| Right-hand Ground HSS For drilling deep and hard-to-reach holes in carbon, alloyed, constructional steels and cast iron. |
LONG PARALLEL SHANK TWIST DRILLS |
| Right-hand Ground: d = 2,0...9,0 mm HSS For deep and hard-to-reach hole (10xd) drilling in carbon, alloyed, constructional steels and cast iron. |
DOUBLE-ENDED BODY DRILLS |
|
| Right-hand Ground: d = 1,45...10,5 mm Split-point: d > 2,30 mm HSS For drilling holes in thin materials (tins). (more) |
REDUCED SHANK TWIST DRILLS |
 | Right-hand Ground, milled: d = 10,0...20,0 mm HSS For drilling carbon, constructional, alloyed steels and cast iron. (more) |
SPECIAL REDUCED SHANK TWIST DRILLS |
 | Right-hand Ground: d = 12,70...30,0 mm HSS/HSSCo For drilling carbon, constructional, alloyed steels and cast iron. |
SMALL-BORE OVERSIZE SHANK TWIST DRILLS |
|
| Right-hand/left-hand Ground: d = 0,25...1,50 mm HSS For drilling small holes in clock-making, fine mechanics and device-making industries. (more) |
PARALLEL SHANK STEP DRILLS |
 Countersink angle 90º-140º | Right-hand Ground HSS Standard tool for simultaneous drilling and 90º-140º countersinking of through holes and clearence holes for metric countersink screws in carbon, alloyed, constructional steels and cast iron. |
| Countersink angle 90º | Right-hand Ground HSS Standard tool for simultaneous drilling and 90º countersinking of tapping holes in carbon, constructional, alloyed steels and cast iron. |
MORSE TAPER SHANK TWIST DRILLS (DIN 345) |
|
Standard DIN 345 | Right-hand Ground: d = 5,0...30,0 mm Milled: d = 10,0...76,0 mm HSS For drilling carbon, alloyed, constructional steels and cast iron. (more) |
LONG MORSE TAPER SHANK TWIST DRILLS (DIN 341) |
 Standard DIN 341 | Right-hand Ground: d = 5,0...30,0 mm Milled: d = 10,0...60,0 mm HSS For drilling carbon, alloyed, constructional steels and cast iron. (more) |
LONG MORSE TAPER SHANK TWIST DRILLS |
 | Right-hand Ground: d = 6,0...30,0 mm Milled: d = 10,0...30,0 mm HSS For drilling carbon, alloyed, constructional steels and cast iron. (more) |
EXTRALONG MORSE TAPER SHANK TWIST DRILLS (DIN 1870) |
 Standard DIN 1870 | Right-hand Ground: d = 23,5...30,0 mm Milled: d = 23,5...50,0 mm HSS For drilling carbon, alloyed, constructional steels and cast iron. (more) |