THE PRECISION COLLECTION

Drill bits

Compare dimensions, choose a quantity and add to your cart.

d – diameter; l – flute length; L – overall length.

Scroll horizontally to see the full table.

Diameter	Flute length	Overall length	Unit price	In stock
8.80 mm	115 mm	175 mm	5.69€	14
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
8.90 mm	81 mm	125 mm	3.89€	>100
Jobber-length left-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
8.90 mm	81 mm	125 mm	3.89€	25
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
8.90 mm	160 mm	250 mm	13.92€	2
Right-hand twist drill with a Morse taper shank. Made from cobalt high-speed steel (HSSCo). For hard-to-machine materials (steels with a tensile strength up to 1,000 N/mm2) and cast iron. Read more...
9.00 mm	110 mm	170 mm	4.49€	77
Right-hand deep-hole drill with a straight shank, made from high-speed steel (HSS). For deep holes in cast iron, carbon steel, bronze, brass and other materials that produce short chips. Read more...
9.00 mm	55 mm	75 mm	7.79€	4
Left-hand step drill with a straight shank. Made from high-speed steel (HSS). For drilling wood. The sharp centre point positions the drill. The angled outer spurs cut the wood fibres cleanly around the edge of the hole. It starts easily and helps prevent splintering as the drill breaks through. d1- 9.0 mm; d2- 6.5 mm; l1- 25 mm; l- 55 mm; L- 75 mm Read more...
9.00 mm	81 mm	125 mm	3.89€	45
Jobber-length left-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
9.00 mm	80 mm	160 mm	3.57€	17
The tool-steel body has a brazed carbide tip for wear resistance at high temperatures. The carbide tip has a reinforced brazed joint and a special point grind for power drilling. Use this SDS bit in a compatible rotary hammer with hammer action. Read more...
9.00 mm	140 mm	210 mm	4.01€	33
The tool-steel body has a brazed carbide tip for wear resistance at high temperatures. The carbide tip has a reinforced brazed joint and a special point grind for power drilling. Use this SDS bit in a compatible rotary hammer with hammer action. Read more...
9.00 mm	230 mm	310 mm	4.78€	39
The tool-steel body has a brazed carbide tip for wear resistance at high temperatures. The carbide tip has a reinforced brazed joint and a special point grind for power drilling. Use this SDS bit in a compatible rotary hammer with hammer action. Read more...
9.00 mm	175 mm	250 mm	13.49€	10
Extra-long right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For deep or hard-to-reach holes in carbon, alloy and structural steels and cast iron. Read more...
9.00 mm	220 mm	320 mm	14.90€	49
Extra-long right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For deep or hard-to-reach holes in carbon, alloy and structural steels and cast iron. Read more...
9.00 mm	280 mm	410 mm	18.90€	10
Extra-long right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For deep or hard-to-reach holes in carbon, alloy and structural steels and cast iron. Read more...
9.00 mm	40 mm	84 mm	1.89€	81
Stub-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
9.00 mm	81 mm	125 mm	3.89€	21
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
9.00 mm	81 mm	125 mm	6.69€	18
Jobber-length right-hand twist drill with a straight shank. Made from cobalt high-speed steel (HSSCo). The Ti geometry is designed for hard-to-machine materials, including titanium, titanium alloys and stainless steels. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. Read more...
9.00 mm	115 mm	175 mm	6.29€	98
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
9.00 mm	81 mm	162 mm	7.49€	2
Right-hand twist drill with a Morse taper shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
9.00 mm	116 mm	240 mm	7.81€	45
Right-hand twist drill with a Morse taper shank. Made from high-speed steel (HSS). For light alloys including aluminium, aluminium-silicon alloys and zinc alloys. Read more...
9.00 mm	81 mm	125 mm	0.99€	>100
This tool-steel wood drill has a specially ground point. The sharp centre point locates the hole, while the two angled outer spurs score the wood fibres for a clean cut. It starts easily and helps prevent splintering as the drill breaks through. Read more...
9.10 mm	81 mm	125 mm	3.89€	>100
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
9.10 mm	81 mm	125 mm	6.69€	30
Jobber-length right-hand twist drill with a straight shank. Made from cobalt high-speed steel (HSSCo). The Ti geometry is designed for hard-to-machine materials, including titanium, titanium alloys and stainless steels. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. Read more...
9.20 mm	81 mm	125 mm	3.89€	35
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
9.20 mm	81 mm	125 mm	6.69€	100
Jobber-length right-hand twist drill with a straight shank. Made from cobalt high-speed steel (HSSCo). The Ti geometry is designed for hard-to-machine materials, including titanium, titanium alloys and stainless steels. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. Read more...
9.20 mm	115 mm	175 mm	6.29€	>100
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...

Find a drill