THE PRECISION COLLECTION

Drill bits

Compare dimensions, choose a quantity and add to your cart.

d – diameter; l – flute length; L – overall length.

Scroll horizontally to see the full table.

Diameter	Flute length	Overall length	Unit price	In stock
8.30 mm	109 mm	165 mm	4.79€	50
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
8.40 mm	37 mm	79 mm	1.49€	50
Stub-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
8.40 mm	75 mm	117 mm	3.59€	100
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
8.50 mm	75 mm	117 mm	3.59€	7
Jobber-length left-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
8.50 mm	165 mm	240 mm	10.90€	50
Extra-long right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For deep or hard-to-reach holes in carbon, alloy and structural steels and cast iron. Read more...
8.50 mm	210 mm	305 mm	12.90€	15
Extra-long right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For deep or hard-to-reach holes in carbon, alloy and structural steels and cast iron. Read more...
8.50 mm	37 mm	79 mm	1.49€	73
Stub-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
8.50 mm	75 mm	117 mm	3.59€	80
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
8.50 mm	75 mm	117 mm	5.99€	20
Jobber-length right-hand twist drill with a straight shank. Made from cobalt high-speed steel (HSSCo). The Ti geometry is designed for hard-to-machine materials, including titanium, titanium alloys and stainless steels. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. Read more...
8.50 mm	109 mm	165 mm	5.69€	28
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
8.50 mm	160 mm	250 mm	7.39€	21
Right-hand twist drill with a Morse taper shank. Made from cobalt high-speed steel (HSSCo). For hard-to-machine materials (steels with a tensile strength up to 1,000 N/mm2) and cast iron. Read more...
8.50 mm	120 mm	300 mm	12.90€	20
Right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
8.50 mm	300 mm	400 mm	16.90€	100
Right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
8.50 mm	75 mm	117 mm	0.99€	>100
This tool-steel wood drill has a specially ground point. The sharp centre point locates the hole, while the two angled outer spurs score the wood fibres for a clean cut. It starts easily and helps prevent splintering as the drill breaks through. Read more...
8.60 mm	81 mm	125 mm	3.89€	50
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
8.60 mm	115 mm	175 mm	6.29€	15
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
8.65 mm	160 mm	250 mm	7.39€	5
Right-hand twist drill with a Morse taper shank. Made from cobalt high-speed steel (HSSCo). For hard-to-machine materials (steels with a tensile strength up to 1,000 N/mm2) and cast iron. Read more...
8.70 mm	81 mm	125 mm	3.59€	>100
Jobber-length left-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
8.70 mm	81 mm	125 mm	3.89€	79
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
8.70 mm	115 mm	175 mm	6.29€	15
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
8.70 mm	100 mm	203 mm	6.39€	1
Right-hand twist drill with a Morse taper shank. Made from cobalt high-speed steel (HSSCo). For drilling carbon, alloy and structural steels and cast iron. Read more...
8.70 mm	115 mm	280 mm	7.99€	>100
Right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
8.80 mm	175 mm	250 mm	12.90€	5
Extra-long right-hand twist drill with a straight shank. Made from cobalt high-speed steel (HSSCo). For deep or hard-to-reach holes in hard-to-machine materials (steels with a tensile strength up to 1,000 N/mm2) and cast iron. Read more...
8.80 mm	81 mm	125 mm	3.89€	15
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
8.80 mm	81 mm	125 mm	6.69€	18
Jobber-length right-hand twist drill with a straight shank. Made from cobalt high-speed steel (HSSCo). The Ti geometry is designed for hard-to-machine materials, including titanium, titanium alloys and stainless steels. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. Read more...

Find a drill