THE PRECISION COLLECTION

Drill bits

Compare dimensions, choose a quantity and add to your cart.

d – diameter; l – flute length; L – overall length.

Scroll horizontally to see the full table.

Diameter	Flute length	Overall length	Unit price	In stock
7.00 mm	69 mm	109 mm	2.59€	59
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
7.00 mm	69 mm	109 mm	3.79€	>100
Jobber-length right-hand twist drill with a straight shank. Made from cobalt high-speed steel (HSSCo). The Ti geometry is designed for hard-to-machine materials, including titanium, titanium alloys and stainless steels. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. Read more...
7.00 mm	102 mm	156 mm	3.89€	27
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
7.00 mm	93 mm	174 mm	5.80€	93
Long-series right-hand twist drill with a Morse taper shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
7.00 mm	25 mm	70 mm	3.99€	>100
Right-hand twist drill with a reduced straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
7.00 mm	69 mm	109 mm	0.99€	3
This tool-steel wood drill has a specially ground point. The sharp centre point locates the hole, while the two angled outer spurs score the wood fibres for a clean cut. It starts easily and helps prevent splintering as the drill breaks through. Read more...
7.10 mm	69 mm	109 mm	2.59€	99
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
7.10 mm	102 mm	156 mm	3.89€	20
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
7.20 mm	69 mm	109 mm	2.68€	100
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
7.20 mm	102 mm	156 mm	3.89€	30
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
7.25 mm	69 mm	150 mm	7.49€	2
Right-hand twist drill with a Morse taper shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
7.30 mm	69 mm	109 mm	2.68€	100
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
7.30 mm	102 mm	156 mm	3.89€	39
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
7.40 mm	69 mm	109 mm	2.79€	>100
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
7.50 mm	69 mm	109 mm	2.80€	15
Jobber-length left-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
7.50 mm	155 mm	235 mm	8.99€	>100
Extended-length right-hand twist drills with Morse taper shanks. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
7.50 mm	155 mm	225 mm	9.49€	10
Extra-long right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For deep or hard-to-reach holes in carbon, alloy and structural steels and cast iron. Read more...
7.50 mm	250 mm	370 mm	9.99€	10
Extra-long right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For deep or hard-to-reach holes in carbon, alloy and structural steels and cast iron. Read more...
7.50 mm	69 mm	109 mm	2.79€	94
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
7.50 mm	69 mm	109 mm	4.69€	27
Jobber-length right-hand twist drill with a straight shank. Made from cobalt high-speed steel (HSSCo). The Ti geometry is designed for hard-to-machine materials, including titanium, titanium alloys and stainless steels. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. Read more...
7.50 mm	102 mm	156 mm	4.49€	92
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
7.50 mm	69 mm	150 mm	7.49€	22
Right-hand twist drill with a Morse taper shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
7.50 mm	69 mm	200 mm	6.69€	98
Right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
7.54 mm	80 mm	113 mm	2.49€	1
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. ASME is a US standards designation. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A… Read more...
7.60 mm	75 mm	117 mm	3.19€	48
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...

Find a drill