THE PRECISION COLLECTION

Drill bits

Compare dimensions, choose a quantity and add to your cart.

d – diameter; l – flute length; L – overall length.

Scroll horizontally to see the full table.

Diameter	Flute length	Overall length	Unit price	In stock
6.50 mm	97 mm	148 mm	3.19€	85
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
6.50 mm	63 mm	144 mm	7.49€	18
Right-hand twist drill with a Morse taper shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
6.50 mm	63 mm	101 mm	0.99€	>100
This tool-steel wood drill has a specially ground point. The sharp centre point locates the hole, while the two angled outer spurs score the wood fibres for a clean cut. It starts easily and helps prevent splintering as the drill breaks through. Read more...
6.60 mm	63 mm	101 mm	3.99€	9
Right-hand step drill with a straight shank. Made from high-speed steel (HSS). For drilling tap holes with a 90° countersink in carbon, structural and alloy steels and cast iron. d1- 6.6 mm; d2- 5.0 mm; l1- 16.5 mm; l- 63 mm; L- 101 mm Read more...
6.60 mm	63 mm	101 mm	2.39€	>100
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
6.70 mm	100 mm	140 mm	3.69€	46
Right-hand deep-hole drill with a straight shank, made from high-speed steel (HSS). For deep holes in cast iron, carbon steel, bronze, brass and other materials that produce short chips. Read more...
6.70 mm	63 mm	101 mm	2.39€	99
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
6.70 mm	63 mm	101 mm	3.29€	24
Jobber-length right-hand twist drill with a straight shank. Made from cobalt high-speed steel (HSSCo). The Ti geometry is designed for hard-to-machine materials, including titanium, titanium alloys and stainless steels. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. Read more...
6.70 mm	97 mm	148 mm	3.19€	20
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
6.75 mm	34 mm	74 mm	1.09€	>100
Stub-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
6.80 mm	69 mm	109 mm	2.39€	>100
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
6.80 mm	69 mm	109 mm	3.79€	45
Jobber-length right-hand twist drill with a straight shank. Made from cobalt high-speed steel (HSSCo). The Ti geometry is designed for hard-to-machine materials, including titanium, titanium alloys and stainless steels. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. Read more...
6.80 mm	102 mm	156 mm	3.59€	100
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
6.90 mm	69 mm	109 mm	2.60€	2
Jobber-length left-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
6.90 mm	69 mm	109 mm	2.59€	>100
Jobber-length right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch mark is rarely needed… Read more...
6.90 mm	102 mm	156 mm	3.59€	100
Long-series right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
7.00 mm	100 mm	150 mm	4.09€	68
Right-hand deep-hole drill with a straight shank, made from high-speed steel (HSS). For deep holes in cast iron, carbon steel, bronze, brass and other materials that produce short chips. Read more...
7.00 mm	61 mm	110 mm	7.19€	>100
Right-hand twist drill with a quick-change hex shank. Made from cobalt high-speed steel (HSSCo) with a titanium coating. For hard-to-machine materials, carbon, alloy and structural steels and cast iron. Read more...
7.00 mm	69 mm	109 mm	2.60€	40
Jobber-length left-hand twist drill with a straight shank. Made from high-speed steel (HSS). For drilling carbon, alloy and structural steels and cast iron. Read more...
7.00 mm	100 mm	152 mm	4.49€	2
Right-hand step drill with a straight shank. Made from high-speed steel (HSS). For drilling and countersinking at 90°–140° in carbon, structural and alloy steels and cast iron. d1- 7.0 mm; d2- 6.0 mm; l1- 10 mm; l- 100 mm; L- 152 mm Read more...
7.00 mm	100 mm	152 mm	5.99€	>100
Right-hand step drill with a straight shank. Made from cobalt high-speed steel (HSSCo). For drilling and countersinking at 90°–140° in carbon, structural and alloy steels and cast iron. Profi drills centre easily, usually without centre-punching. They last longer and can drill holes up to five times faster. The special split point helps the drill centre itself and resist wandering. A centre-punch… Read more...
7.00 mm	70 mm	130 mm	5.99€	3
Right-hand step drill with a straight shank. Made from cobalt high-speed steel (HSSCo). For drilling and countersinking at 90°–140° in carbon, structural and alloy steels and cast iron. d1- 7.0 mm; d2- 6.3 mm; l1- 20 mm; l- 70 mm; L- 130 mm Read more...
7.00 mm	155 mm	225 mm	7.49€	48
Extra-long right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For deep or hard-to-reach holes in carbon, alloy and structural steels and cast iron. Read more...
7.00 mm	200 mm	290 mm	8.29€	100
Extra-long right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For deep or hard-to-reach holes in carbon, alloy and structural steels and cast iron. Read more...
7.00 mm	250 mm	370 mm	9.49€	3
Extra-long right-hand twist drill with a straight shank. Made from high-speed steel (HSS). For deep or hard-to-reach holes in carbon, alloy and structural steels and cast iron. Read more...

Find a drill